Lawn Mower Troubleshooting
Electric Lawn Mower |
Step 1: Examine the blades for obstructions or debris hindering their rotation. Step 2: Adjust cutting height if too low, to avoid straining the motor. Step 3: Ensure the correct Extension cord is being used Step 4: Tilt the handle down, and press & hold the safety lock button while pulling the switch lever to start. Note: Mow at a suitable speed to allow the blades to cut the grass effectively. |
Battery Powered Lawn Mower |
Step 1: Examine the blades for obstructions or debris hindering their rotation. Step 2: Adjust cutting height if too low, to avoid straining the motor. Step 3: Ensure the battery clicks in place Step 4: If applicable, remove the safety key and re-insert it Step 5: Tilt the handle down, and press & hold the safety lock button while pulling the switch lever to start. Note: Mow at a suitable speed to allow the blades to cut the grass effectively. |
Manual Lawn Mower |
Are your wheels moving backward? Step 1: Remove the handles and the grass catcher. Turn the mower reel upside down to expose the cutting bar Step 2: Using one of the twenty (20) pieces of paper provided, Insert between the cutting bar and reel blades, then slowly turn the wheel by hand |
Self Propelled Lawn Mower - 24V-X2-21LMSP |
Step 1: Remove the Safety Key and Re-insert it Step 2: Press the Handle Release Button and Lower the Handle. Then, proceed to extend the handle until you hear it click on both sides. Step 3: Set the Speed to Low Step 4: Press down the triangle button for 10 seconds without pulling back on the lever. Release Button, and press it down again and pull back on the switch lever.
How to Use Self Propelled System: 1. Start the lawn mower as indicated by step 1 to step 4 2. While holding the switch lever against the handle with your left hand, push the self-propel lever to the handle with your right hand. 3. Proceed with operation with both hands holding the self-propel lever and the switch lever together with the soft grip |
24V-X2-17LM Blade Tightening |
|